Lamenters WIP for Battle for Salvation!

Battle for Salvation is next weekend!  If you have not already signed up, now is your chance. There is less than ten spots left!  Don't be left out of one of the best GTs on the East Coast.

BFS is not just about 40k though, there are tournaments for Malifaux, X-Wing, and Youngbloods! (14 and under).  It has been a couple of years since I went. It seemed that the last couple years things kept popping up that would keep me away from the con.  Not this time!

I am taking my poor cursed Lamenters for their second major round of action. Last time I brought them out was at Templecon and while I got crushed on the tables, they did win Players Choice and Best Painted (though I had to choose one to actually receive.)  I hope to perform well at BFS too, though I am up against some stiff competition with John Steining showing up, as well as my old friend Joe Johnson if he comes and many other great painters.  This should be a stiff field!

Here is a LINK for BFS.

Here are some WIP shots of the unluckiest squad in the unluckiest chapter:

The melta gunner has not actually befallen any bad luck yet... but that can change!

Hope to see you all at BFS!

Jawaballs

Lamenters from Templecon 2014

As promised! This is VERY pic heavy folks. Sorry for the long load time but it is worth it!

Yes there is still a lot of work to be done. I am very unhappy with the basing, and some of the models are unfinished, such as the sergeant terminator with the unfinished power sword.  But when you look at the army as a whole, and the layers upon layers of yellow it took to accomplish the appearance than you can get an appreciation for this army.

This army won Best Painted and Players Choice (Though I had to give that one up, I could only have one) at Templecon.

This was just the first wave of painting though. I will be completely unveiling this army in October at The Battle for Salvation Best Painted Invitational. (I have no idea what they are really calling it, we will go with that.)  The invitational is a full GT that will run alongside the competitive BFS GT.  However, in order to get into this one, you need to have won a Best Painted at a major tournament!  I was already in for having won Best Painted a couple years ago at BFS, but this just cements the deal.

Why is this awesome! Because it should be about the funnest tournament I have ever played in.  First of all, in theory, I should be up against other dudes like me, who care more about the hobby than the game. And I should be facing other lists that won't table me 4 out of 5 games!  The event should be an eye candy extravaganza and loads of fun.  I can't wait!  

What do I have to do now? I need to remake my display.  There is a lot I am unhappy with on this one, from the layout to the execution. I don't think there is any salvaging this one.  In that process, I will rebase most of the models.  With that said though, I think this display was a huge success. (we are our own worst critics)  I have been promising for years a display with lights, motion and sound and I finally delivered.  I did learn a thing or two here.  I won't get too into it, but there should be fast improvements for the October display.  Until then enjoy! There is video at the bottom.

Here is some video.

Jawaballs

Late night update

Hey guys. I just wanted to share a quick WIP update on my Lamenters dread with LED lights.  I need to work on the checks more, and decide if I want to keep the checks on the leg plate with the checker base which is not changing.  I think it is a bit too much check!  I will probably just paint the leg armor yellow.

You can see all of the WIP behind him too. Three are assault squads, my librarian, couple scouts, death compnay and way back is a rhino.  Most of the models in the army are mostly done. I need to finish a handfull of marines like the ones closely behind this dread, then base and final detail.  I am pushing to have this totally done by the 26 cause I want to play in a local 3 game tournament.  That is just a week away!

I have all the materials for the display and I am going to start putting that together tomorrow.  I should have some nice update pics for you on Monday.

More to come!

Jawaballs

LED Dreadnought!

Continuing to work on my Lamenters army, it has become apparent that I need to pick up the game. So I contacted the guys I met from Powered Play Gaming while I was at Nova and picked up some of their LED kits!

What they offer are a set of pre wired LEDs complete with switch, battery, plug and play board and an assortment of colored lights.  Why is this awesome?  Because any one can do it.  I had zero experience with wiring or LEDs other than playing around with my tealight base.  I was intimidated by having to wire, solder, and power LEDs within my models.

These kids are intended to be used within wargaming models, and are made to be incredibly easy to use.  Here are some pictures showing how:

 Open up the pack and you pull out a mass of wires and a little board.  At first glance it seems a bit confusing, but each wire is labeled with it's color and it very quickly becomes apparent what to do. Any one who has hooked up an Xbox to a TV can do this!

Here is the board.  There are 6 sockets on the board. Two of them are larger than the others, These are the two that the switch and power goes into. It is obvious by the size of the plugs.

They sell miniature 9 volt batteries.  You can get one of these, or use the plug provided to hook up a regular sized 9 volt.

Here you can see the switch and battery about to go into their plugs.

Then you plug in one of the LED plugs into any of the four remaining slots and whammo!

Here is a closeup of the board. The two slots on the left are for the battery and switch, leaving 4 slots for LEDs. Easy?

If you decide not to get the miniature 9 volt which runs like 10 bucks, the kit comes with this regular 9 volt plug that you can use instead.

And here is the result!

My WIP dreadnought. I lit up the blood claws with red LEDs and the cockpit and range finders under the chassis with blue.

Here is the view without the armor on. I am painting up the pilot that will be exposed. You can see my clumsy application of the LEDs inside the cabin.  I used a hot glue gun to set them in place.  It was important to place them the way I did, pointing at the view finders, because I used a fiber optic pack also available from Powered Play.  I drilled out the range finders, and inserted a piece of fiber optic. The pack that they sell comes with three different sized round bits of optic plus a couple of square rods and a file.

The lights have to be shining into the ends of the optics in able to have the optic 'carry' the light.  Here you can see me showing how it works. If you look at the near end of the bit of optic you can see the blue light shining through.  The other end is up against the LED in the cabin.

Here you can see the back of my model and how I hid the wires. I built up a base using some plastic side walk pieces I found from a model train company.  It looks like temple flooring.  Inside the base I had enough room to store all of the wire and the battery and I used hot glue to seal it up. Yes, once the battery wears out, this guy will go dark. :(  Well not exactly, I purposefully glued the board to the base behind the model.

First this will allow me to put in a new battery if I desired. But also, this leaves me two extra slots to add more LEDs that I plan on using on my display. This dread is going to be in a repair gantry being worked on by servitors.  When he is on display I can plug him into some LEDs wired into the gantry!

Now, I suggest you use these before gluing your model together. This model was already painted red and has been re purposed as a Lamenters dread.  This meant I had to pull him apart to do the work.  The chassis came apart easy, but I had to drill holes into the arms to enable the LED to fit. I was able to wire the arms through the shoulders, but in order to wire the model to the base I had to drill holes through the bottom of the torso.  You can see the wires here.  Had I the know how to snip the wires, I could have maybe drilled holes through the legs before assembling the model, and wired them completely internally. But I found a good enough way. I inserted two straws into the base to serve as access pipes and left the wireing partly exposed on the ground .This will look like a ragtag repair bay where the dread is charging up...  I hope.  I will find some more wire bits and leave them lying around and stuff.  

I am going to use these to light up a landing pad for my Storm Raven, and to wire up the storm raven itself.  But again, it has been assembled, so I am fairly limited on what I can do.  For example I wanted to light up my Rhino headlights but since that model is almost complete it simply wont be possible.

Plan out whatever lighting you want to do while your models are still on sprue!

Any way, if I could do this, YOU can.  They are working with Secret Weapon to create some bases already built to house the wires and batteries, and have new stuff on the way, like a board that can make the LED "flicker".

I will have a lot more of this posted up soon including some how to Video once I shoot it.  Until then, this LED kit get a huge thumbs up from me. Visit the website HERE and if you want to take the leap give Chris a call, he was super helpful with suggesting how to do this.

More to come!

Jawaballs